Posts Tagged ‘Standing Power Chair’

4 Things to keep your Redman Power Chair Humming

Tuesday, September 4th, 2012

Keep It Clean. Like anything that has moving parts, your Redman Power Chair should be cleaned from time to time. You can use a spray bottle with soapy water for general cleaning, but take care to not get water in or around the electronics, motors, and connecters. For tougher cleaning, you can use a small amount of WD-40. Use computer dust-off to keep all the dust from accumulating on moving parts.

Keep It Lubricated. Use WD-40 liberally on all of the hinged points and sewing machine oil where indicated in your manual. It’s good to lubricate every 30 days, or as needed when you hear a squeak. Remember this rule of thumb: If it is squeaking it is wearing.

Keep It Charged. If you are using your chair every day you should be charging every day. A typical charge will take 8 hours. Try to never drive in the red zone on your charge indicator to avoid getting stranded without power. Driving in the red zone will unduly shorten the life of your battery.

Keep It Cool. Our power chair can take a lot of abuse, but like anything, heat can take a toll. When maneuvering in tight places on soft surfaces (especially carpeting) you are using incredible amounts of energy and that equals heat. That heat will shorten the life of the motor and controller on you power chair. The key to a long life for your power chair is to minimize this kind of use.

Do you have a question on how to keep your Redman Power Chair humming? Got a suggestion of your own? Let us know in the comments below!